搜索结果: 1-10 共查到“材料科学 Aluminium alloy”相关记录10条 . 查询时间(0.046 秒)
Purpose: of this paper is investigation of the ability of the high speed roll casting of 5182 aluminium alloy. Appropriate twin roll caster to cast the 5182 strip was researched.
Design/methodology/a...
Stereometry specification of anodised and PVD coated surface of aluminium alloy
Metallic alloys Mechanical properties Metallography
2009/12/3
Purpose: The aim of the work is to present the influence of casting method and anodic treatment parameters on
properties, thickness and structure of an anodic layer with (PVD) physical vapour deposit...
Influence of the ageing on mechanical properties of the aluminium alloy AlSi9Mg
Mechanical properties Age-hardening Aluminium
2009/12/2
Purpose: The goal of this paper was study the influence of temperature and time in the age-hardening on the
selected mechanical properties and hardness of the AlSi9Mg alloy.
Design/methodology/appro...
Identification of phase composition of AlSi5Cu2Mg aluminium alloy in T6 condition
Metallic alloys Electron microscopy Microstructure
2009/12/2
Purpose: The purpose of this paper is to present the results of studies of AlSi5Cu2Mg cast alloy in T6 condition
at an angle of intermetallic phases composition. It was found that the investigated a...
Intermetallic phase particles in 6082 aluminium alloy
Metallic alloys Microstructure Electron microscopy Intermetallic phases
2009/12/1
Purpose: In the technical 6xxx Al alloys besides the intentional additions Mg i Si, transition metals and
impurities (Fe and Mn) are always present. Even not large amount of these impurities causes t...
Fatigue Crack Growth Behaviour of 6013 Aluminium Alloy at Different Ageing Conditions in Two Orientations
Fatigue Crack growth rate Aluminium alloy Ageing AA6013
2009/10/9
The effect of different ageing treatments on the fatigue crack growth behaviour of AA6013 aluminium alloy was investigated. C(T) (Compact Tension) specimens prepared in L-T and T-L orientations were a...
Experimental study to analyse the workpiece surface temperature in deep hole drilling of aluminium alloy engine blocks using MQL technology
Minimum Quantity Lubricant (MQL) Aluminum alloys Temperature Deep Hole Drilling (DHD)
2010/1/19
Purpose: The objective of this applied research is to investigate the MQL deep hole drilling method, in order
to increase productivity and replace the current method of drilling main oil gallery hole...
Experiment on high speed machining parametres for sport shoe sole mold making using aluminium alloy 5083,6163 and 7075
High Speed Machining Sport shoe sole Aluminium 5058
2010/1/19
Purpose: The objective of this experiment is to obtain the fine surface roughness that is required less final
polishing process as well as shortest manufacturing lead time.
Design/methodology/approa...
Morphology prediction of intermetallics formed in 4xxx type of aluminium alloy
Metallic alloys Electron microscopy Microstructure Intermetallic phase
2010/1/19
Purpose: It is intention of this paper to present results of studies of AlSi5Cu2Mg cast alloy in T6 condition
with emphasis on composition of intermetallic phases. It was revealed that the microstruc...
Influence of modification on structure, fluidity and strength of 226D aluminium alloy
Aluminum alloys Modification Microstructure Castability Strength
2011/3/17
In the article the fluidity, solidification conditions, microstructure and tensile properties have been studied for the non-modified and modified 226D aluminium silicon alloy.
Realized investigations...