搜索结果: 1-6 共查到“金属材料 Stainless steel”相关记录6条 . 查询时间(0.062 秒)
Yield stress of duplex stainless steel specimens estimated using a compound Hall–Petch equation
Yield stress duplex stainless steel specimens estimated compound Hall–Petch equation
2010/10/12
In this study, the 0.2% yield stress of duplex stainless steel was evaluated using a compound Hall–Petch equation. The compound Hall–Petch equation was derived from four types of duplex stainless stee...
Structure and properties of forming austenitic X5CrNi18-9 stainless steel in a cold working
Metallic alloys Austenitic stainless chromium-nickel steel Plastic deformation
2009/12/14
Purpose: The aim of the paper is to analyze the influence of the degree of rolling reduction on the structure forming and changes of mechanical properties in cold-rolled sheet-metals of austenitic X5C...
Potentiodynamic studies of stainless steel wire for endourology
Metallic alloys Biomaterials Corrosion
2009/12/3
Purpose: The purpose of the study is to evaluate resistance to electrochemical corrosion of wire made of Cr-Ni stainless steel, designed for use in endourological treatment. The influence of strain fo...
Flattening of narrow and thin stainless steel strips
Plastic forming Ball rolling mill Stainless steel
2009/12/2
Purpose: The purpose of this paper is to evaluate the influence of technological parameters of flattening in the
ball rolling mill on spread and geometrical properties of strips made of stainless ste...
The study of high speed fine turning of austenitic stainless steel
High speed fine turning Austenitic stainless steel Surface roughness
2010/2/8
Purpose: The purpose of this research paper is focused on the surface roughness variation in high speed fine turning of the austenitic stainless steel.Design/methodology/approach: A series of experime...
On low temperature ion nitriding of austenitic stainless steel AISI 316
Thermo-chemical treatment Nitriding S-phase Nitride layer
2010/2/9
Purpose: The purpose of this paper is to discuss some problems concerning the extremely high values of the nitride layer hardness and the features of so called S-phase which are formed after low-tempe...