工学 >>> 材料科学 >>> 材料科学基础学科 >>> 相图与相变 >>>
搜索结果: 1-15 共查到知识库 相图与相变相关记录209条 . 查询时间(1.652 秒)
马氏体相变赋予了形状记忆合金众多功能特性,在智能驱动与固态制冷等领域具有广阔的应用前景。针对NiMnX系列形状记忆合金,在取向相关的功能特性和相变特性等方面的研究取得了重要进展,为相变功能材料研制提供了理论指导。
关联过渡金属氧化物由于存在d电子的多种自由度耦合,具有一系列丰富且相互竞争的磁电量子有序态和能量相近的低能激发态,因而蕴含着塑造多维信息载体的可能,而对其磁性和电性态来源的研究和调控是基础。4d钙钛矿结构Ru氧化物SrRuO3和CaRuO3都具有正交钙钛矿晶格结构,且Ru原子均为+4价态,但是它们的物理性质却截然不同。SrRuO3是铁磁(TC=160 K)金属性,CaRuO3具有更强的正交晶格畸变...
新型铁磁形状记忆合金具有多功能、高效率、绿色环保的综合优势,是智能驱动与固态制冷应用的理想候选材料。在取向相关的功能特性和相变特性等方面取得了重要进展,为设计和研制新型铁磁功能材料提供了理论支撑,基于相变调控择优取向开发出高性能多晶磁控功能材料。承担了科技部863计划项目、国家自然科学基金重点项目等10余项科研项目,在《Acta Mater.》等材料学领域国际学术期刊发表相关论文80余篇。
The only feasible access to non‐face‐centered cubic (FCC) copper was by physical vapor deposition under high vacuum. Now, non‐FCC copper is observed in a series of alkynyl‐protected Cu53 nanoclusters ...
结合Thermo-Calc和Dictra软件考虑了多组元条件下的凝固和溶质扩散过程, 建立了元胞自动机(CA)模型, 对ASTM A216 WCA铸钢凝固及后续冷却过程的相变进行了模拟. 设计了阶梯形试件进行浇注与测温实验, 并用 OM和SEM观察了铸态试件不同部位的微观组织, 测定了先共析α铁素体的含量及其晶粒尺寸、珠光体的层片间距, 并将数值模拟结果和实验结果进行了对比,分析了冷却条件对铸态微...
研究了低成本制备技术反应熔渗方法制备的SiC/MoSi2和SiC/Mo (Si, Al)2复合材料高温氧化行为。表面氧化物的形态和氧化增重的研究结果表明,所制备复合材料高温氧化3 h 后即发生钝化现象,继续在500℃再进行低温氧化试验,发现限制该材料使用的“Pest”现象消失。其中渗铝复合材料SiC/Mo (Si, Al)2高温增重较渗硅SiC/MoSi2严重。当后者中形成的 SiC增强相全部为原...
通过热模拟压缩实验, 研究了铁素体相变前的奥氏体晶粒尺寸对基于动态相变的热轧C-Mn-Al-Si系TRIP钢组织及力学性能的影响. 结果表明, 减小原始奥氏体晶粒尺寸, 可促进动态相变时的铁素体相变动力学, 有利于铁素体、贝氏体及残余奥氏体等相分布更为均匀, 获得的贝氏体束及贝氏铁素体尺寸较小, 残余奥氏体的体积分数及C含量均较高, 细小的颗粒状残余奥氏体数量较多且弥散分布, 因此可获得具有较高强...
The purpose of this work was to determinate the influence of the 20% Sr substitutions (in sublattice A) on changes of the character of phase transition (PT) in comparison with pure barium titanate BaT...
The purpose of this work was to prepare ceramic material BaTiO3 (BT) as well as solid solution of Ba1-xNaxTi1-xNbxO3 (for x = 0.005) (BNTN05) type and correlate their structural (polycrystalline) prop...
Purpose: Verification of up-to-now used metallographic preparation of the TBC coating thermal barriers and adaptation of them to layers of new types, based on new ceramic compounds, sprayed on convent...
Purpose: In this paper the mechanical properties and structure of cold rolled austenitic stainless steel X5CrNi18-8 with a draft of 17%-78% were presented. Design/methodology/approach: The main meth...
Purpose: Influence of austenitiziation parameters (temperature and time) on grain size and mechanical properties of low alloy cast steel have been investigated. Design/methodology/approach: The grai...
Purpose: Purpose of this research was to demonstrate tool wear by hard turning of martensitic stainless steel and this material is pronounced as difficult to machine material. The evaluation was done...
Purpose: The aim of the paper is to determine the influence of cooling conditions on a structure and a shape of CCT-diagrams of TRIP-aided steels. Design/methodology/approach: The diagrams of unde...
Purpose: The composition of metallic matrix in ductile iron as-cast and after austempering at temperatures of 280, 330 and 380oC (ADI) was examined. Design/methodology/approach: The study presents ...

中国研究生教育排行榜-

正在加载...

中国学术期刊排行榜-

正在加载...

世界大学科研机构排行榜-

正在加载...

中国大学排行榜-

正在加载...

人 物-

正在加载...

课 件-

正在加载...

视听资料-

正在加载...

研招资料 -

正在加载...

知识要闻-

正在加载...

国际动态-

正在加载...

会议中心-

正在加载...

学术指南-

正在加载...

学术站点-

正在加载...