搜索结果: 1-13 共查到“工学 strips”相关记录13条 . 查询时间(0.046 秒)
Modeling of Absolute Orientation of Adjacent Satellite Image Strips Using A Few Ground Control Points
Orbit-modeling Strip SPOT-3 GCP DEM Sensor model Orbit-attitude model
2015/11/23
This paper presents accuracy and stability of orbit modeling. Orbit modeling is carried out using the stereo strips which were taken by SPOT-3 satellite, a large number of GCPs(Ground control points) ...
LIDAR Strip Adjustment using Conjugate Linear Features in Overlapping Strips
LIDAR Adjustment Semi-Automation Matching Accuracy
2015/11/20
LiDAR (Light Detection And Ranging) is a multisensory system consisting of three main components: laser, GPS, and IMU units. The basic principle is to measure distances from the sensor to the ground b...
APPLYING 3D AFFINE TRANSFORMATION AND LEAST SQUARES MATCHING FOR AIRBORNE LASER SCANNING STRIPS ADJUSTMENT WITHOUT GNSS/IMU TRAJECTORY DATA
Airborne Laser Scanning adjustment LIDAR georeferencing quality control
2014/6/5
In this article we extend our previous work on the topic of ALS strip adjustment without GNSS/IMU trajectory data. Between overlap- ping strip pairs the relative orientation as a 3D affine trans...
Microstructure evolution in CRCS processed strips of CuCr0,6 alloy
Microstructure evolution CRCS strips
2010/8/12
Several different methods have been proposed to produce ultra fine grained (UFG) or nano-structured (NS) materials by imposing severe plastic deformation (SPD). Semi products produced by SPD are of gr...
Ultrafine grained strips of CuCr0.6 alloy prepared by CRCS method
Severe plastic deformation Ultra fine grained material Mechanical properties
2009/12/14
Purpose: The aim of this work was to evaluate the ability of a continuous repetitive corrugation and straightening (CRCS) technique in creating ultra fine grained copper-chromium strips as well as to ...
High speed twin roll casting of 6061 alloy strips
Casting Twin roll caster Body-sheet Recycle
2009/12/2
Purpose: of this paper is to clear the possibility of high speed roll casting of thin strips of two aluminum alloys:
6061 and recycled 6061. Mechanical properties of the roll cast 6061 and recycled 6...
Flattening of narrow and thin stainless steel strips
Plastic forming Ball rolling mill Stainless steel
2009/12/2
Purpose: The purpose of this paper is to evaluate the influence of technological parameters of flattening in the
ball rolling mill on spread and geometrical properties of strips made of stainless ste...
Thermovision systems used to improve a technological process for hot-rolled copper and brass strips
Metallic Alloys Copper Brass
2010/1/19
Purpose: This paper contains description made on thermovision testing with the use of Inframetrics 760B system. Measurements were executed on the surface of a heat furnace and also on the surface of m...
Analytical regularization method for electromagnetic wave diffraction by axially symmetrical thin annular strips
Analytical Regularization Annular Strips Antenna
2009/7/28
A new mathematically rigorous and numerically efficient method based on the combination of Orthogonal
Polynomials Method, and Analytical Regularization Method, for electromagnetic wave diffraction by...
Residual stresses in the strips from copper-based alloys
Metallic alloys Mechanical properties X-ray diffraction method
2010/2/9
Purpose: The aim of this work was to define the stress state in the strips from copper-based alloys with an account of the parameters of rolling and flattening.
Design/methodology/approach: Samples o...
STRIPS规划领域中动作效果关系的研究
2007/11/1
Wu XJ, Jiang YF, Ling YB. Research on relations of effect of action for STRIPS domain.
Journal of Software, 2007,18(6):1328-1349.DOI:
10.1360/jos181328 http://www.jos.org.cn/1000-9825/18/1328.ht...
基于STRIPS的领域知识提取策略
2007/11/1
Wu XJ, Jiang YF, Ling YB. Strategy of extracting domain knowledge for STRIPS world.
Journal of Software, 2007,18(3):490-504.DOI:
10.1360/jos180490 http://www.jos.org.cn/1000-9825/18/490.htm摘要
...
A numerical model for hot rolling of aluminum strips
A numerical model for hot rolling of aluminum strips
2010/3/15
A numerical model for hot rolling of aluminum strips.