搜索结果: 1-15 共查到“材料科学 manufacturing”相关记录26条 . 查询时间(0.14 秒)
中山大学材料科学与工程学院王山峰教授团队《Additive Manufacturing》：一种可超快打印组织工程支架的光固化树脂（图）
不饱和聚酯 王山峰教授 超支化反应型稀释剂 微立体光刻技术 3D打印技术
2022/6/10
近日，王山峰教授团队创新地使用超支化反应型稀释剂去优化聚富马酸丙二醇酯（PPF）树脂，充分利用了面投影微立体光刻技术的快速制备优势，实现了可降解、无细胞毒性组织工程用多孔支架的超快、高精度打印，同时显著提高支架结构的模量、韧性、和形变回复率。相关成果以“Projection printing of scaffolds with shape recovery capacity and simulta...
中国地质大学科学技术发展院赵思佳(硕士研究生)，周克清*等，工程学院 Available online 25 April 2019，Composites Part A:Applied Science and Manufacturing, In situ fabrication of molybdenum disulfide based nanohybrids for reducing fire hazards of epoxy
层状；二硫化钼；二维纳米；结构；优异
2021/10/20
近日，国际著名学术期刊《Composites Part A: Applied Science and Manufacturing》在线刊发了中国地质大学工程学院周克清副教授团队的研究成果——“In situ fabrication of molybdenum disulfide based nanohybrids for reducing fire hazards of epoxy”。该文第一作者...
2017材料工程与制造国际会议（2017 International Conference on Material Engineering and Manufacturing）
2017 材料工程 制造 国际会议
2017/5/23
Welcome to the official website of the 2017 International Conference on Material Engineering and Manufacturing (ICMEM2017). The Conference will be held in Chengdu, China during October 9-11, 2017.
2017年第八届材料与制造技术国际会议（2017 8th International Conference on Material and Manufacturing Technology） (ICMMT 2017)
2017年 第八届 材料与制造技术 会议
2017/3/9
You are sincerely invited to take part in 2017 8th International Conference on Material and Manufacturing Technology (ICMMT 2017) in Singapore during May 4-6, 2017.
2017年第八届制造科学与技术国际会议（2017 the 8th International Conference on Manufacturing Science and Technology） (ICMST 2017)
2017年 第八届 制造科学与技术 会议
2017/3/9
2017 8th International Conference on Manufacturing Science and Technology (ICMST 2017), will be held in Hong Kong during June 23-25, 2017. It is supported by the Department of Mechanical Engineering (...
2017年第二届设计，材料与制造国际会议（2017 2nd International Conference on Design, Materials and Manufacturing）
2017年 第二届 设计 材料 制造 国际会议
2017/3/9
Welcome to the official website for 2017 2nd International Conference on Design, Materials and Manufacturing (ICDMM 2017). ICDMM conference is an annual conference started in 2016(Kuala Lumpur, Malays...
2017年高级制造与材料国际会议 (ICAMM 2017)（2017 International Conference on Advanced Manufacturing and Materials (ICAMM 2017)）
2017年 高级制造与材料 会议
2017/3/1
2017 International Conference on Advanced Manufacturing and Materials (ICAMM 2017), will be held in The Hong Kong Polytechnic University, Hong Kong during June 25-27, 2017.
Nanoshaping method points to future manufacturing technology
Nano Shaping method future manufacturing technology
2014/12/30
WEST LAFAYETTE, Ind. – A new method that creates large-area patterns of three-dimensional nanoshapes from metal sheets represents a potential manufacturing system to inexpensively mass produce innovat...
Dynamic scheduling for agent based manufacturing systems
Dynamic scheduling agent manufacturing systems
2010/8/12
The conventional scheduling approach, known as static scheduling may solve the problem and provide the - usually suboptimal - schedule, yet in real life conditions they turn out to be impractical beca...
Application of powder injection moulding and extrusion process to manufacturing of Ni-YSZ anodes
Composites Powder metallurgy Sintering
2009/12/14
Purpose: Investigation of the Ni-YSZ cermets for anode supported solid oxide fuel cells (SOFC) prepared by extrusion or powder injection moulding process, sintered and reduced of NiO-YSZ.
Design/meth...
Manufacturing of polymer matrix composites using vacuum assisted resin infusion molding
Polymer Composite VARIM technique
2009/12/2
Purpose: The purpose of the paper is to manufacture the polymer matrix composites using vacuum assisted resin
infusion molding.
Design/methodology/approach: Electrical heating resistances are used f...
Electrochemical process for the manufacturing of titanium alloy matrix composites
titanium composite oxides
2009/10/23
The paper presents a new method for precursors' synthesis of titanium alloys matrix composites through an electrochemical process in molten calcium chloride. The cathode of the cell was made from meta...
Control of cast iron and casts manufacturing by Inmold method
Inmold ATD Ultrasounds Microstructure
2011/3/31
In this paper the usability of cast iron spheroidizing process in mould control by ATD method as well as by ultrasonic method were presented. Structure of instrumentation needed for control form perfo...
Control of cast iron and casts manufacturing by Inmold method
Inmold ATD Ultrasounds Microstructure
2011/3/31
In this paper the usability of cast iron spheroidizing process in mould control by ATD method as well as by ultrasonic method were presented. Structure of instrumentation needed for control form perfo...
The geometrical precision of the silicone matrices to the manufacturing of the models of the gear
non-destructive researches geometrical precision rapid prototyping silicone matrix gear
2011/3/30
The article presents the researches of geometrical precision of silicone casting form manufactured with using of the process of rapid prototyping of the tools (RT – Rapid Tooling). The testing casti...