搜索结果: 1-15 共查到“有色金属及其合金 Alloy”相关记录110条 . 查询时间(0.093 秒)
Thermal analysis, structure and mechanical properties of the MC MgAl3Zn1 cast alloy
Thermal analysis structure mechanical properties MC MgAl3Zn1 cast alloy
2010/8/12
The industrial output of magnesium alloys has been rising by almost 20% per annum over recent years, which is faster than that of any other metals [1]. Magnesium alloys are stiffer and more recyclable...
Effect of high power diode laser surface alloying on structure of MCMgAl12Zn1 alloy
Magnesium alloys Surface treatment Laser treatment Silicon carbide
2010/8/17
During the last few decades the world has seen a rapid growth of application of magnesium and its alloys almost in every field of today's industry. This is due to numerous characteristics of the metal...
Cooling rate influence on microstructure of the Zn-Al cast alloy
Metallic alloys Derivative thermo analysis Zn-Al alloy Microstructure
2010/8/17
Properties of cast zinc alloys are comparable to these of aluminium alloys. Differences are connected to a lower melting temperature and bigger density. Zinc has a density of 7.14g/cm3, melting temper...
Composite materials based on EN AW-Al Cu4Mg1(A) aluminum alloy reinforced with the BN ceramic particles
Aluminum alloy Composite materials Powder metallurgy Corrosion resistance Polarisation curve Abrasive wear
2010/8/17
Considerable attention is focused on metal matrix reinforced with strength and high modulus ceramic reinforcements because of their superior properties in comparison with most of conventional material...
Derivative thermo-analysis application to assess the cooling rate influence on the microstructure of Al-Si alloy cast
thermo-analysis assess cooling rate microstructure Al-Si alloy cast
2010/8/12
Copper and magnesium addition enable to perform precipitation hardening of the multicomponent aluminium alloys with silicon, by precipitation of the Al2Cu or Mg2Si phase particles. However copper addi...
The high alloy precipitation hardening martensitic steels and their suitability for welding
Metallic alloys Welding metallurgy Martensitic steels Heat treatment
2010/8/17
High alloy martensitic steels studied in the present work, have well over 20% of the alloying elements and belongs to the two broad categories, the high-nickel maraging steels and the chromium-nickel ...
Structure and mechanical properties of AlZnMgCuZr alloy manufactured from powders
Al alloys Powders Extrusion
2010/1/11
The subject of the research was to study the effect of microstructure and mechanical properties of an alloy AlZnMgCuZr with addition of 0.45 % Zr manufactured from powders. Paper also presents results...
Effect of heat treatment on tensile and fracture toughness properties of 6082 alloy
Metallic alloys Fracture mechanics Mechanical properties
2009/12/14
Purpose: The present study investigates the effect of heat treatment parameters (temperature and time) on the tensile properties and fracture toughness of 6082 aluminium alloy.
Design/methodology/app...
Structure investigation of the Al-Si-Cu alloy using derivative thermo analysis
Aluminium alloys Mechanical properties Thermo analysis
2009/12/14
Purpose: This research work presents the investigation results of derivative thermoanalysis performed using the UMSA device (Universal Metallurgical Simulator and Analyzer). The material used for inve...
Purpose: of this paper is investigation of the ability of the high speed roll casting of 5182 aluminium alloy. Appropriate twin roll caster to cast the 5182 strip was researched.
Design/methodology/a...
Influence of workpiece inclination angle on the surface roughness in ball end milling of the titanium alloy Ti-6Al-4V
Machining Ball end milling Workpiece inclination angle
2009/12/14
Purpose: The aim of this work is to provide an in-depth understanding of the surface texture produced by various workpiece inclination angles using high speed finish ball end-milling of the titanium a...
Achieving combined high strength and high conductivity in re-processed Cu-Cr alloy
Metallic alloys Cu-alloys Mechanical Properties
2009/12/14
Purpose: Precipitation hardening by nano-sized precipitates had proven to be the most adequate way to achieve the optimum combination for strength and conductivity in copper based alloys. However, pre...
Stereometry specification of anodised and PVD coated surface of aluminium alloy
Metallic alloys Mechanical properties Metallography
2009/12/3
Purpose: The aim of the work is to present the influence of casting method and anodic treatment parameters on
properties, thickness and structure of an anodic layer with (PVD) physical vapour deposit...
The investigations of hot-deformability and structure of high-temperature Fe–Ni alloy
Metallic alloys Hot deformation Recrystallization
2009/12/3
Purpose: This study describes the influence of initial austenite grain size and parameters of hot plastic deformation on the deformability and structure of high-temperature Fe–Ni austenitic alloy of A...
Purpose: The goal of this paper is to present the new methodology to determine the thermal characteristics
of magnesium alloy using the novel Universal Metallurgical Simulator and Analyzer Platform.
...