搜索结果: 1-6 共查到“非晶、微晶金属材料 Alloy”相关记录6条 . 查询时间(0.015 秒)
Ultrafine grained strips of CuCr0.6 alloy prepared by CRCS method
Severe plastic deformation Ultra fine grained material Mechanical properties
2009/12/14
Purpose: The aim of this work was to evaluate the ability of a continuous repetitive corrugation and straightening (CRCS) technique in creating ultra fine grained copper-chromium strips as well as to ...
Influence of change of direction of deformation at ECAP technology on achieved UFG in AlMn1Cu alloy
Plastic Forming ECAP process of AlMn1Cu alloy Structure analysis
2009/12/14
Purpose: of this paper is to extend a complex evaluation of aluminium alloy, which requires very often knowledge of behaviour of deformation at the ECAP process and achieved strengthening, intensity o...
Crystallization of amorphous Co77Si11.5B11.5 alloy
Amorphous materials Electrical properties and magnetic properties Heat treatment annealing
2009/12/1
Purpose: The investigation results of crystallization of amorphous Co77Si11.5B11.5 alloy in tape form, obtained
by melt spinning method during annealing in temperature range 373-873 K with step of 50...
Investigations of crystallization behaviour of Co80Si9B11 amorphous alloy
Materials Amorphous Materials Nanomaterials Heat treatment
2009/12/1
Purpose: This paper describes crystallization kinetics and changes of magnetic properties involved by process of
crystallization of the amorphous Co80Si9B11 alloy.
Design/methodology/approach: The f...
Effects of high magnetic fields on solidified structures of Mn-90.4 wt% Sb hypoeutectic alloy
high magnetic fields Mn–Sb alloy orientation
2010/1/18
Mn-90.4 wt% Sb alloy specimens were solidified under both uniform magnetic field and magnetic field gradient conditions. The solidification behavior was examined to elucidate the effects of high magne...
Rate-dependent serrated flow and plastic deformation in Ti45Zr16Be20Cu10Ni9 bulk amorphous alloy during nanoindentation
nanoindentation AFM TEM metallic glass
2010/10/12
The plastic deformation of Ti45Zr16Be20Cu10Ni9 bulk metallic glass has been investigated by
nanoindentation performed with loads ranging from 10 to 200mN in a wide range of loading
rates. The plasti...