搜索结果: 1-10 共查到“知识库 工学 intermetallics”相关记录10条 . 查询时间(0.041 秒)
Hot rolling of intermetallics FeAl phase based alloys
Plastic forming Iron aluminides Hot rolling
2009/12/2
Purpose: The one of major problem restricting universal employment of intermetallic phase base alloy is
their low plasticity which leads to hampering their development as construction materials. The ...
Microstructure and mechanical properties of intermetallics on the base of Fe-Al alloy obtained by casting
Metallic alloys Iron aluminides Fe-Al alloys
2009/12/1
Purpose: The aim of this work is to study the results of investigations of chromium addition influence on a
microstructure and tensile properties of intermetallics from the Fe-Al system based on Fe3A...
Water vapor effect on high-temperature oxidation behavior of Fe3Al intermetallics
intermetallic compounds iron aluminides water vapor
2010/1/19
Fe3Al intermetallics (Fe3Al, Fe3Al-Zr, Fe3Al-Zr,Mo and Fe3Al-Zr,Mo,Nb) were oxidized at 950 °C in dry and humid (11 vol% water) synthetic air. Thermogravimetric measurements showed that the oxidation ...
Heat resistance of Fe-Al intermetallics in the context of selected heat-resistant and hihg-temperature creep resistant steels
Fe-Al type intermetallics heat resistance heat resistant and high-temperature creep resistant steels
2011/3/30
Results are hereby presented of heat-resistance tests of two Fe3Al and FeAl intermetallic phase-based alloys in the context of St41k-type boiler steel and 50H21G9N4 high-temperature creep resistant st...
Heat resistance of Fe-Al intermetallics in the context of selected heat-resistant and hihg-temperature creep resistant steels
Fe-Al type intermetallics heat resistance heat resistant and high-temperature creep resistant steels
2011/3/30
Results are hereby presented of heat-resistance tests of two Fe3Al and FeAl intermetallic phase-based alloys in the context of St41k-type boiler steel and 50H21G9N4 high-temperature creep resistant st...
Microstructural characterisation of EN AW6061 alloy matrix composites with Ti3Al intermetallics reinforcement
Mechanical alloying Aluminium matrix composites Intermetallics
2010/1/19
Purpose: The main aim of this work is to investigate microstructure of EN AW6061 matrix composites with
Ti3Al intermetallics reinforcement produced by powder metallurgy techniques and hot extrusion.
...
Morphology prediction of intermetallics formed in 4xxx type of aluminium alloy
Metallic alloys Electron microscopy Microstructure Intermetallic phase
2010/1/19
Purpose: It is intention of this paper to present results of studies of AlSi5Cu2Mg cast alloy in T6 condition
with emphasis on composition of intermetallic phases. It was revealed that the microstruc...
Mechanical alloying for fabrication of aluminium matrix composite powders with Ti-Al intermetallics reinforcement
Mechanical alloying Aluminium matrix composites Intermetallics
2010/1/19
Purpose: The aim of this work is to report the effect of the high energy milling processes, on fabrication of
aluminium matrix composite powders, reinforced with a homogeneous dispersion of the inter...
The effect of intermetallics on the fracture mechanism in AlSi1MgMn alloy
Metallic alloys Fracture mechanics Electron microscopy
2010/2/4
Purpose: Fracture toughness in aluminium alloys is one of the main obstacles to using these materials in widespread ways and, therefore, various aspects of fracture mode would be examined closely, poi...
Processing and structure of laminated iron-intermetallics composites
Innovative materials Laminated composite Iron Intermetallic phase
2011/3/17
Using Fe sheets and Cu and Ti foils, Fe-intermetallic phases laminated composites have been fabricated through reactive sintering at 900oC for 15, 30 and 120 minutes in vacuum. After 15 minutes at 900...